John Deere 1050K

John Deere 1050K

A slow-running EPA Final Tier 4 (FT4)/EU Stage IV diesel engine delivers proven performance in mining, quarrying, roadbuilding, and other large-scale applications. Standard Eco mode maximizes fuel economy without loss of performance, automatically adjusting engine rpm and transmission settings based on load to burn up to 15-percent less fuel depending on application. Dual-path hydrostatic transmission allows you to push a full load through turns without losing material, unlike torque-converter transmissions on many competitor machines. Independent track control speeds up or slows each side — for smooth, full-power turns. Rip hard ground fast with hydrostatic transmission’s automatic adjustments of speed and torque. Low-effort controls command blade curvature and the full-featured hydrostatic drivetrain, delivering predictable response at all times and virtually eliminating jerky or abrupt movements. Ergonomically correct joystick provides intuitive, low-effort control of steering, direction, and ground speed. Detented so it doesn’t require an operator’s constant touch or attention, it employs a thumb-actuated travel-speed-control switch.

Specifications John Deere 1050K:

Engine Manufacturer John Deere
Engine Model PowerTech PSS 6135
Displacement, ltr (Inches³) 13.5 (824)
Rated Speed, rpm 1800
Engine Output – Net, kW (hp) 261 (350)
Transmission Type Hydrostatic
Speeds Mode 1 – Forward 1
Speeds Mode 1 – Reverse 1
Final Drive Planetary
Track Rollers 8
Shoe – Pitch, mm (inches) 215.9 (8.5)
Shoe – Type Single Grouser – Extreme Service
Ground Contact Area, cm² (Inches²) 41684 (6462)
Number Of Shoes 46
Height – Max, mm (ft/in) 3476 (11 ft 5 in)
Ground Clearance, mm (inches) 537 (21)
Track Length – On Ground, mm (ft/in) 3419 (11 ft 2 in)
Track Gauge, mm (ft/in) 2184.4 (7 ft 2 in)
Blade – Width, mm (ft/in) 3964 (13 ft )
Blade – Dig Depth, mm (inches) 707 (28)
Blade – Tilt, mm (ft/in) 900 (2 ft 11 in)
Fuel Tank, ltr (gallons (US)) 681 (180)
Hydraulic Tank, ltr (gallons (US)) 87 (23)
Blade – Capacity, m³ (yd³) 9.5 (12.4)
Speed – Forward Maximum, kph (mph) 11 (6.8)
Speed – Reverse Maximum, kph (mph) 11 (6.8)
Ground Bearing Pressure, kPa (PSI) 101 (14.6)
Implement Pump – Type Variable Displacement Piston
Implement Pump – Flow, lt/min (gallons (US) / min) 290 (77)
Implement Pump – Pressure, bar (PSI) 249.93 (3625)
Operating Weight, kg (lbs) 42800 (94300)

John Deere 1050K John Deere 1050K John Deere 1050K John Deere 1050K

Leave a Reply

Your email address will not be published. Required fields are marked *