Claas Xerion-5000 (12 Series)

The XERION 12 Series completely redefines the top-of-the-range tractor segment up to 650 hp. These new models are the result of over 25 years’ experience in the large tractor sector. Featuring remarkably greater strength in terms of tractive power, comfort, assistance services and above all, profitability, they herald a new era. Because strength is more than power.

Claas Xerion-5000

XERION 12.650 TERRA TRAC 12.650 TRAC 12.590 TERRA TRAC 12.590 TRAC
Engine l 15.6 Mercedes-Benz 15.6 Mercedes-Benz 15.6 Mercedes-Benz 15.6 Mercedes-Benz
Rated engine power hp 605 605 585 585
Max. engine power hp 653 653 585 585
Engine speed rpm 1,900 1,900 1,900 1,900
Max. toruqe ft-Ib 2,287 2,287 2,102 2,102
PTO speed at engine speed rpm 1,000 at 1,500 1,000 at 1,500 1,000 at 1,500 1,000 at 1,500
Transmission CMATIC Eccom 5.5 Eccom 5.5 Eccom 5.5 Eccom 5.5
Max. output with 1 pump (std.) gpm 58 58 58 58
Max. output with 2 pumps (opt.) gpm 118 118 118 118
Max. output with 3 pumps (opt.) gpm 142 142 142 142
Max. speed mph (kph) 25 (40) 31 (50) 25 (40) 31 (50)
Max. lift capacity lbs (kg) 29,983 (13,600) 29,983 (13,600) 29,983 (13,600) 29,983 (13,600)

Claas Xerion-5000

The new 12.650 and 12.590 models in the XERION 12 Series are the flagships in the segment up to 650 hp. Both are available with either crawler tracks or dual tyres.

Claas Xerion-5000

We have complete faith in the reliability of our tractors. The XERION needs an engine oil change only once every 1000 operating hours. This means less downtime, leaving you to focus on getting your work done when the time is right. But security of investment also depends on reliable technology. The 15.6 litre Mercedes-Benz engine with an output of up to 653 hp is exceptionally reliable, while an intelligent drive train coupled with the low-speed concept ensures fuel-efficient operation, even under extreme conditions.

Claas Xerion-5000

The new XERION was designed for heavy draught work. The 6-cylinder Mercedes-Benz engine with 15.6 litre cubic capacity is available in two versions: 653 hp in the XERION 12.650 and 585 hp in the XERION 12.590. It delivers full effective torque of 3100 and 2850 Nm. Need more hydraulic power? You’ve got it. Up to three hydraulic pumps and eight spool valves deliver a maximum of 537 litres per minute. That’s unrivalled in this segment. So even at low engine speeds, the XERION delivers enough oil to operate even the largest of implements with outstanding efficiency.

Claas Xerion-5000

Claas Xerion-5000

Claas Xerion-5000

Claas Xerion-5000

Залишити відповідь

Ваша e-mail адреса не оприлюднюватиметься. Обов’язкові поля позначені *